home>Solutions>SOLUTIONS>Daisy Chain HDIP system

Daisy Chain HDIP system

1. Overview

Distributes video to multiple displays in series using Video over IP techniques with our Daisy Chain HD system. Connect up to 50 displays using CAT5 cables in a daisy chain mode going from one display to the next. It is over IP technique, connect up to 50 displays using CAT-x cables with a daisy chain mode, it is easy for you to get a video wall up to 4x4 via the DIP switch.

The system utilizes 2 modules: The Transmitter, DS200-TX, which connects to the HD source, the Receiver, DS200-RX, which connects via CAT5 cable to the Transmitter, and via HDMI cable to the display.

Extend and daisy-chain HDMI using CATX cables
Each CAT5(or better) cable run up to 330 feet (100 meters)
Supported HDMI Features:
Resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
HDCP compliant
Stereo PCM audio
Lip Sync pass-through
Support up to 50 levels for the moment
Support multiple up to 4x4 video walls by just setting the receiver’s DIP switches

2. Application Diagram

2.1 One To Many:

 2.2 Two To Many:

In this application, 2 DS200-TX units connect to the same source via a HDMI splitter and connect to the receivers in a loop way. When one of the 2 transmitters does not work or any link between 2 devices gets broken, the system will still work. 

3. Product Image and Basic Features

3.1 Transmitter (DS200-TX)

Transmitter Features:
Equipped with a HDMI port for source connection
Up to 1920x1200@60 input
Equipped with an audio output that allows extraction from the connected source
Equipped with an RS-232 port (reserved for the moment) 
Locking power supply connectors

3.2 Receiver (DS200-RX)

Receiver Features:
Equipped with an HDMI output
Built-in auto scaler
Up to 1920x1080p@60 output
Support up to 4x4 video wall by setting screen position DIP
Equipped with an audio output that allows audio extraction from the routed source
Equipped with an RS-232 port (reserved for the moment)
Auto source detect and auto turn on or off the display by issue CEC command
Locking power supply connectors

North America: services@avaccess.com
Europe: service@avaccess.com
Australia: service-au@avaccess.com
US Tel: 626-840-8817
Copyright © AV Access. All Rights Reserved.
Follow us