When it comes to AV over IP solution, an Ethernet switch is undoubtedly the focal device for the whole AV system composed of multiple IP encoders and decoders. It connects all codecs together on a LAN and utilize packet switching to forward data to and from the codecs. There are two basic types of Ethernet switches, managed and unmanaged. For managed switches, IGMP (The Internet Group Management Protocol) usually needs to be configured when all the AV codecs are hooked up for multipoint-to-multipoint application. Obviously, this has increased installation difficulty for common users. AV Access HDIP100 IP-based solution is designed to solve the problem. It can work with both managed and unmanaged switches, providing real plug-and-play user experience.
AV Access HDIP100 is a brand-new H.265 IP encoder/decoder, with which you can easily build a distributed IP matrix system with video wall function on the mobile App. It is super easy to install and requires no configuration. With its easy-to-use and plug-n-play features, it can be widely used in sports bars, conference rooms, digital signages, etc.
No Configuration Required, Totally No-Brainer Solution
IP-based AV products use different network protocols for different operations. The network protocol can be UDP/ IP and TCP/IP, and the transmission mode can be broadcast, unicast and multicast. HDIP100 solution supports both unicast and multicast streaming, so it can easily work with common managed or unmanaged Ethernet switches on the market.
It just takes a few steps to complete installation. First of all, get all the devices prepared and hook them up, including several HDIP100 codecs, HDMI sources and monitors, an unmanaged ethernet switch as well as a wireless router. Second, install the free VDirector App on your iPad or android phone, then connect it to the wireless router. Finally, you can easily perform A/V switching or create a video wall on your palms. Whether you are an installer or end-user, you can effortlessly complete installation, even if you were not exposed to any IP knowledge before.
Video Wall Support & APP Control
With the intuitive and user-friendly VDirector App installed on your mobile device, visual control on your palms is a total breeze! The wireless router delivers data from the codecs to your mobile device via Ethernet switch. You can take a few drag-and-drop steps to perform matrix switching, or build a video wall up to 16×16 with different layouts. Fast and seamless switching is also supported for perfect user experience. The decoder is equipped with a built-in scaler, so you can switch one video source to another in a fast and seamless way.
In addition to the VDirector App (for iPad or android phone), you can also install IP Conductor Lite software on your Windows PC for visual management and control.
Flexible, Scalable and Powerful IP System
HDIP100 supports point-to-point application, so only one pair of encoder and decoder can work together to transmit 1080P HD video signal up to 394ft/120m. You can also add up to 254 units of encoders or decoders to form a distributed IP matrix, which is far more flexible and cost-effective than traditional matrixes.
What’s more, this zero-configuration system supports H.265 video compression, L/R stereo audio de-embedding, RS232 pass-through, PoE and other amazing functions.
It has always been AV Access’s mission to provide plug-and-play and practical products for users across the globe. In short, AV Access HDIP100 encoder/decoder offers an absolutely simple, economical and reliable IP-based solution. With unmanaged switch compatibility, you can complete its installation even without professional guidance.